BOOK A SERVICE CAR NEWS
×

Cooling System Inspection

Cooling System Inspection

One of the most performance and reliability sensitive components of your vehicle is your cooling system. Regardless of whether you run a fleet of semi-trucks, operate a heavy-duty construction vehicle, or a driver of industrial equipment, maintaining the temperature of the engine will save you expensive failures and the engine life will be prolonged. We offer all-inclusive cooling system checks to fleets, commercial and heavy-duty trucks at Berks Auto Repair in Reading, PA.

Our ASE-certified mechanics can provide HVAC cooling system or diesel engine cooling system checks to keep your trucks and equipment on the road without overheating.

The Importance of Cooling System Inspections

Your engine temperature is kept at a controlled level by the cooling system which circulates the coolant in the radiator, hoses, water pump and thermostat. So, a poorly maintained system might experience overheating, broken engine blocks, burst head gaskets or costly downtimes.

Our inspections cover:

  • Overheating of the cooling system.
  • Checks on the corrosion of radiators.
  • Checks on the level of fleet antifreeze.
  • Coolant flow diagnostics
  • Truck thermostat checks.
  • Radiator and fan clutch services.

This is the most important tool in preventing emergency repairs to cooling systems in the event of businesses in Berks County.

Fleet and Commercial Cooling System Services

1.      HVAC Cooling System Check

With climate control vehicles, we do a HVAC cooling system check to verify that there is good airflow and that the passengers are comfortable without causing too much energy consumption.

2.      Heavy-Duty Coolant Flush

Our suggestion is to perform regular heavy-duty coolant flushes to get rid of contaminants, rust and scale. Clean coolant also prevents corrosion as well as temperature control.

3.      Construction Vehicle Cooling Check

Our department is involved in inspection of construction vehicle cooling systems, which ensure that bulldozers, loaders, and excavators operate effectively when they are overloaded.

4.      Diesel Engine Cooling System Service

Our services on the diesel engine cooling system include semi-trucks and heavy equipment that requires specific needs of the diesel engine, which produces increased heat.

Important Cooling System Inspection Areas

·         Check Performance of water pump

To ensure that their circulation and flows are current, our technicians undertake fleet vehicle water pump inspections and performance checks.

·         Cooling FAN Control System Diagnostics

Heat is regulated by fans and fan clutches. We carry out diagnostics of cooling fan systems to ensure the provision of proper engagement.

·         Radiator Inspections

We offer semi-truck radiator flushes, semi-truck radiator inspection, and industrial truck radiator inspections to check the radiators are not clogged, cracked, or corroded.

·         Coolant Leak Detection

Our tests and repair services include commercial vehicle coolant leaks tests and repair of industrial vehicles with low fluid levels leading to overheat.

·         Truck Coolant Hose Inspections

Breakdowns are as a result of cracked or leaking hoses. We check the integrity and fit of all hoses.

Advanced Cooling System Diagnostics

Our inspection services are:

  • Checks of vehicles temperature indicators in the fleet.
  • Troubleshooting of engine cooling system.
  • Cooling of industrial engines.
  • Checking of truck coolant reservoirs.
  • Radiator cap pressure test service.
  • Fleet radiator pressure test.
  • Diagnostic testing in commercial truck coolant sensor.

These tests will give reliable information about the performance of your cooling system.

Onsite and Mobile Cooling System Solutions

Downtime is expensive as we are aware of that, and that is why Berks Auto Repair has mobile fleet cooling inspections. You can get onsite radiator inspection, thermostat checks, and coolant flushes whether your trucks are in the yard or on a job site to ensure fewer disruptions.

Checks of Heavy-Duty and Industrial Cooling Systems

We also have experience in the diagnostics of heavy-duty cooling systems, and heavy equipment coolant systems. In case of tractors, trailers, industrial vehicles, and construction fleets, we offer the following services:

  • Suspension noise diagnostics of industrial vehicles (when vibrations on cooling are observed).
  • Cooling checks on off road vehicles.
  • Maintenance of cooling systems to be used through time.
  • Overheating engine checks are also offered by us that ensure safe and efficient operations.

Typical Cooling System Problems

  • Broken or dripping radiator hoses.
  • Radiators or reservoir tanks that are corroded.
  • Weak or slipping water pumps
  • Malfunctioning thermostats
  • Faulty coolant sensors
  • Low antifreeze levels
  • Unchecked, these problems can create great disruptions.

These issues are identified at an early stage by inspections of our fleet cooling system near Reading, PA.

Advantages of Periodical Cooling System Checks

  • Better vehicle uptime: Minimise the chances of breakdowns.
  • Long life of engine: Avoids overheating and internal damages.
  • Greater fuel efficiency: Engines are more efficient at correct temperatures.
  • DOT compliance: Commercial inspection is regular.
  • Less expensive repairs: Large problems are dealt with at an early stage.

Conclusion

Your cooling system forms the heart of your fleet cars and heavy machinery. Berks Auto Repair in Reading, PA, provides professional care, including commercial truck coolant sensor diagnostics, semi-truck radiator flushes and inspections to ensure that your vehicles are reliable and on the road. Relinquish your cooling systems to us to have them serviced proactively before they are hit by repair expenses.

Require some mobile radiator and coolant? Book now to have onsite fleet inspections in Reading, PA.

Frequently Asked Questions

Q1. What is the frequency of a cooling system check on fleet vehicles?

At minimum of every 12 months or 12,000 miles, particularly in heavy-duty trucks.

Q2. What makes up a cooling system inspection?

Radiator pressure tests, coolant hose tests, thermostat tests, and antifreeze level tests are included in the list of checks.

Q3. Do you provide fleet mobile cooling systems inspections?

Yes, we deliver on site cooling check and mobile-based radiator fleet services.

Q4. What is the indicator that my truck is overheating?

Symptoms are overheating, leaking of coolants, low level of antifreeze and fluctuated temperature.

Q5. Are you able to fix coolant leakages in industrial cars?

Yes, we are experts in the repair of coolant leakages in industrial vehicles and cooling diagnostics of heavy equipment.

Quality repairs that you can trust every time means that you can rely on the repair services to fix your vehicle correctly, Efficiently, and safely. When you take your car

Contact Us

Stay Connected